So you want to determine your bangle size?

Well, it's easy. You can either

a. Measure any bangle that you own

or

b. Measure the widest part of your hand / knuckle circumference, while your hand is mooshed. (And yes, mooshed is a word).

Let us talk you through each option.

a. Measure any bangle that you own

For this option, you'll need any other bangle or bracelet that fits you, and a ruler or measuring tape.

Step 1. Pick up the ruler.

Step 2. Put your bangle on the table.

Step 3. Measure the inner diameter of your bangle. And what is the diameter you ask?

This bit.

Step 4. Figure out of the diameter of your bangle and match it to the size below.

SMALL SIZE DIAMETER
60.3mm / 2.37"

REGULAR SIZE DIAMETER
(Recommended Size for Most)
63.7mm / 2.5"

LARGE SIZE DIAMETER
66.9mm / 2.63"

EXTRA LARGE SIZE DIAMETER
70.0mm / 2.75"

 
If you are unsure or you don't have a bangle to measure (or you're ordering for a friend and you can't secretly measure their knuckle size), we recommend ordering a regular size bangle as they will fit most. If you pick the wrong size, the bangle can be exchanged.

b. Measure the widest part of your mooshed hand / knuckles

For this option, you'll need at least one hand and a measuring tape.

Step 1. Pick up the measuring tape.

Step 2. Moosh your hand. That is, squish together your four fingers, and tuck your thumb under your hand.

Step 3. Take the measuring tape and measure around the knuckles on your hand. This is the widest part of your hand and the bit the bangle will need to squeeze over.

Step 4. Figure out the circumference of your mooshed hand and match it to the sizes below.

SMALL SIZE CIRCUMFERENCE 
189.3mm / 7.45"

REGULAR SIZE CIRCUMFERENCE
(Recommended Size for Most)
200mm / 7.87"

LARGE SIZE CIRCUMFERENCE
210mm / 8.26"

EXTRA LARGE SIZE CIRCUMFERENCE
219mm / 8.62"

A NOTE FOR YOU - DO NOT MEASURE YOUR WRIST AND CHOOSE THE SIZE BASED ON THAT. (Yes I had to yell for that bit).

You may have a small wrist but a wide hand, therefore you may need a regular / large size. Measuring an existing bangle is the best option, but the mooshed hand is a good alternative.

We do offer exchanges for the wrong bangle size, you'll just need to send the bangle back (at your cost) to us with a note letting us know your order number and which size you'd like to switch to.

Good luck!